Sharp AR-M162 사용자 가이드
7
ACCOUNT LIMIT
This program is used to set limits for the number of
pages that can be printed by each account in print
mode and copy mode.
pages that can be printed by each account in print
mode and copy mode.
Select "ACCOUNT LIMIT" and press the [OK] key. The
following screen appears.
following screen appears.
Limiting the number of pages used by an
account
account
1
Select "SINGLE ACC. LIMIT" with the [
]
or [
] key and then press the [OK] key.
2
Select "COPIER" or "PRINTER" mode with
the [
the [
] or [
] key.
3
Press the [OK] key.
4
Enter the desired account number with the
numeric keys.
numeric keys.
5
Enter a page usage limit with the numeric
keys (max. 50000).
keys (max. 50000).
• "0" cannot be specified.
• If you wish to cancel the limit, press the [C] key and go
• If you wish to cancel the limit, press the [C] key and go
to step 6.
6
Press the [OK] key.
7
If you wish to set a limit for another
account number, repeat steps 4 to 6.
account number, repeat steps 4 to 6.
If you press the [BACK] key, you will return to the screen
of step 2. If you wish to set a limit for the other mode
(copy or printer), select the mode in step 2 and repeat
steps 3 to 6. To exit, press the [BACK] key repeatedly.
of step 2. If you wish to set a limit for the other mode
(copy or printer), select the mode in step 2 and repeat
steps 3 to 6. To exit, press the [BACK] key repeatedly.
Setting a limit for all accounts
1
Select "ALL ACC. LIMIT" with the [
] or
[
] key and then press the [OK] key.
2
Select "COPIER" or "PRINTER" mode with
the [
the [
] or [
] key.
3
Enter the page usage limit for all accounts
with the numeric keys (max. 50000).
with the numeric keys (max. 50000).
If you wish to cancel the limit, press the [C] key and go
to step 4.
to step 4.
4
Press the [OK] key.
You will return to the screen of step 2. If you wish to set
a limit for the other mode (copy or printer), select the
mode in step 2 and repeat steps 3 to 4. To exit, press
the [BACK] key repeatedly.
a limit for the other mode (copy or printer), select the
mode in step 2 and repeat steps 3 to 4. To exit, press
the [BACK] key repeatedly.
ACC. # SECURITY
When this program is enabled, the machine will not
allow operation for one minute if an incorrect account
number is entered three times in a row. During this
time, "Please see your key operator for assistance."
will appear in the display.
allow operation for one minute if an incorrect account
number is entered three times in a row. During this
time, "Please see your key operator for assistance."
will appear in the display.
To enable this program, select "ACC. # SECURITY"
and then press the [OK] key so that a checkmark
appears in the checkbox.
and then press the [OK] key so that a checkmark
appears in the checkbox.
To disable this program, select "ACC. #
SECURITY" and then press the [OK] key so that a
checkmark does not appear in the checkbox.
SECURITY" and then press the [OK] key so that a
checkmark does not appear in the checkbox.
CANCEL JOBS OF INVALID
ACCOUNTS
ACCOUNTS
When enabled, this program cancels a print job if no
account number is entered or an invalid account
number is entered. This program is only effective when
"AUDITING MODE" has been enabled for print mode.
The function is initially disabled (factory default setting).
account number is entered or an invalid account
number is entered. This program is only effective when
"AUDITING MODE" has been enabled for print mode.
The function is initially disabled (factory default setting).
To prohibit printing when a valid account number
is not entered, select "CANCEL JOBS OF INVALID
ACCOUNTS" and then press the [OK] key so that a
checkmark appears in the checkbox.
is not entered, select "CANCEL JOBS OF INVALID
ACCOUNTS" and then press the [OK] key so that a
checkmark appears in the checkbox.
To allow printing when a valid account number is
not entered, select "CANCEL JOBS OF INVALID
ACCOUNTS" and then press the [OK] key to
remove the checkmark from the checkbox.
not entered, select "CANCEL JOBS OF INVALID
ACCOUNTS" and then press the [OK] key to
remove the checkmark from the checkbox.
DEVICE CONTROL
These programs are used to configure settings for
hardware functions of the machine. To access one of
these programs, select "DEVICE CONTROL" in the
mode selection screen, select the desired program in
the device control screen, and press the [OK] key.
hardware functions of the machine. To access one of
these programs, select "DEVICE CONTROL" in the
mode selection screen, select the desired program in
the device control screen, and press the [OK] key.
WAITING COPY LAMP SETTING
This program is used to select whether the copy lamp
(light source) is on or off when the machine is in standby
mode. If the copy lamp (light source) is set to turn off in
standby mode, power will be conserved, however, the
first copy time will be longer than if the lamp is on.
The factory default setting is "ON".
(light source) is on or off when the machine is in standby
mode. If the copy lamp (light source) is set to turn off in
standby mode, power will be conserved, however, the
first copy time will be longer than if the lamp is on.
The factory default setting is "ON".
ACCOUNT LIMIT
SINGLE ACC. LIMIT
ALL ACC. LIMIT
Pages printed by invalid account numbers
are added to the page count of "OTHERS"
(account number).
are added to the page count of "OTHERS"
(account number).
Note
Pegasus-E_Keyope_Sec.book 7 ページ ２００６年２月１５日 水曜日 午後２時３５分