Sharp MX-2300N 사용자 가이드

The following settings are related to copying. Touch the [Copy Settings] key and configure the settings.
Default settings selected with these settings apply to all functions of the machine (not just the copy function).

The copier settings are reset when the [POWER] key 
(

) is turned on, when the [CLEAR ALL] key (

) is 

pressed, or when the auto clear interval has elapsed. 
These settings are used to change the default settings 
for copy mode. The following settings can be changed:

• Color Mode
• Paper Tray
• Exposure Type
• Copy Ratio
• 2-Sided  Copy
• Output (output method and output tray)

Touch each key and configure the settings.
If you wish to return a changed default setting to the 
original setting, touch the [Return to the Factory Default 
Setting] key.

This is used to adjust the exposure level when "Auto" is 
used for the copy exposure.
Touch the [Color] key or the [B/W] key, select the 
exposure level with the 

 keys for both the 

document glass and the automatic document feeder, and 
touch the [OK] key. Lower the level toward "1" for lighter 
exposure or raise the level toward "9" for darker exposure.

When the original and paper are placed in different 
orientations, this function automatically rotates the image 
90 degrees to enable correct copying on the paper.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.

Two enlargement preset ratios (101% to 400%) and two 
reduction preset ratios (25% to 99%) can be added. An 
added preset ratio can also be changed.

Select the "Reduction" key or the "Enlargement" key, 
specify the value with the 

 keys, and touch the 

[OK] key. (To make the number change quickly, keep 
your finger on the 

 or 

 key.)

This is used to set the maximum number that can be 
entered for the number of copies (number of continuous 
copies). Any number from 1 to 999 can be specified.
Enter the number with the numeric keys and touch the 
[OK] key.

If this setting is used to change the default setting for 
the duplex function to other than "1-Side to 1-Side" 
and the duplex function or automatic document feeder 
fails or is disabled, the setting will revert to "1-Side to 
1-Side".

• Rotation copy will operate only if Auto Paper 

Selection or Auto Image has been selected.

• The Rotation Copy setting must be enabled when 

copying 5-1/2" x 8-1/2" (A5) size original on 
5-1/2" x 8-1/2"R (A5R) paper.

Preset ratios other than added preset ratios cannot be 
changed.

System Settings

Add or Change Extra Preset Ratios

Reduction

(25  99)

(101  400)

Enlargement

OK