Sharp MX-5500N 작동 가이드
103
4
Touch the key of the desired destination
position.
position.
The touched position key is highlighted and the print position
changes.
changes.
The keys that show the print positions will appear as follows
depending on the state of the settings.
depending on the state of the settings.
The above key is the top left key. The appearance of each key
varies depending on the position of the key.
varies depending on the position of the key.
If you wish to swap the position of the selected stamp item with the position of another stamp item, temporarily move
either one of the items to an unoccupied position and then switch the print positions.
either one of the items to an unoccupied position and then switch the print positions.
5
Touch the [OK] key.
If you attempt to move the stamp item to a position that is
already occupied by another stamp item, a message will
appear asking you if you wish to overwrite the other stamp
item. To overwrite the other stamp item, touch the [Yes] key. To
cancel the move, touch the [No] key.
already occupied by another stamp item, a message will
appear asking you if you wish to overwrite the other stamp
item. To overwrite the other stamp item, touch the [Yes] key. To
cancel the move, touch the [No] key.
6
Touch the [OK] key.
Select the location to move the selected item.
OK
Stamp
Move
Not selected, stamp setting has not
been selected.
been selected.
Selected during selection of the stamp
setting.
setting.
Not available, stamp setting has already
been selected.
been selected.
Select the location to move the selected item.
OK
Stamp
Move
Yes
No
An item has been already selected to
this location. Overwrite the item?
AAA AAA
CONFIDENTIAL
1,2,3..
DO NOT COPY
Stamp
Layout
OK