Sharp MX-5500N 작동 가이드
72
ADDING INSERTS WHEN COPYING ON
TRANSPARENCY FILM
(Transparency Inserts)
TRANSPARENCY FILM
(Transparency Inserts)
When copying on transparency film, the sheets may stick together due to static electricity. The transparency inserts
function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the
sheets easy to handle.
It is also possible to copy on the inserts.
function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the
sheets easy to handle.
It is also possible to copy on the inserts.
1
Load the transparency film.
• If you are using the bypass tray, load the transparency film
face down in the tray.
When placing the transparency film, the rounded corner of
the film should be:
When placing the transparency film, the rounded corner of
the film should be:
• At the front and left if the film is oriented horizontally.
• At the back and left if the film is oriented vertically.
• At the back and left if the film is oriented vertically.
• After loading the transparency film, configure the bypass tray
settings as explained in "
" (page 41).
• If you are using tray 3, see "Loading transparency film" in the
User's Guide. After loading transparency film in tray 3, select
tray 3 as explained in "
tray 3 as explained in "
" (page 14).
2
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
3
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the [Transparency Inserts] key.
☞
C
B
A
Inserts
Oriented
horizontally
horizontally
Oriented
vertically
vertically