Jet 414610 n 사용자 가이드
5
23. Maintain a balanced stance at all times so
that you do not fall or lean against moving
parts. Do not overreach or use excessive
force to perform any machine operation.
parts. Do not overreach or use excessive
force to perform any machine operation.
24. Use the right tool at the correct speed and
feed rate. Do not force a tool or attachment
to do a job for which it was not designed.
The right tool will do the job better and more
safely.
to do a job for which it was not designed.
The right tool will do the job better and more
safely.
25. Use recommended accessories; improper
accessories may be hazardous.
26. Maintain tools with care. Keep cutting tools
sharp and clean for the best and safest
performance. Follow instructions for
lubricating and changing accessories.
performance. Follow instructions for
lubricating and changing accessories.
27. Turn off machine and disconnect from power
before cleaning. Use a brush or compressed
air to remove chips or debris — do not use
your hands.
air to remove chips or debris — do not use
your hands.
28. Do not stand on the machine. Serious injury
could occur if the machine tips over.
29.
Never leave the machine running
unattended. Turn power off and do not leave
machine until it comes to a complete stop.
unattended. Turn power off and do not leave
machine until it comes to a complete stop.
30. Remove loose items and unnecessary work
pieces from the area before starting the
machine.
machine.
31. Do not grind magnesium, as it may create a
fire hazard.
Familiarize yourself with the following safety
notices used in this manual.
notices used in this manual.
This means that if precautions
are not heeded, it may result in minor injury
and/or possible machine damage.
and/or possible machine damage.
This means that if precautions
are not heeded, it may result in serious or even
fatal injury.
fatal injury.
4.0 About this manual
This manual is provided by Walter Meier (Manufacturing) Inc. covering the safe operation and
maintenance procedures for a JET Model BG-379 Belt Grinder. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. Your machine has been designed and constructed to provide years of trouble-free operation
if used in accordance with instructions set forth in this document.
maintenance procedures for a JET Model BG-379 Belt Grinder. This manual contains instructions on
installation, safety precautions, general operating procedures, maintenance instructions and parts
breakdown. Your machine has been designed and constructed to provide years of trouble-free operation
if used in accordance with instructions set forth in this document.
This manual is not intended to be an exhaustive guide to belt grinder operational methods, stock choice,
abrasive selection, etc. Additional knowledge can be obtained from experienced users or trade journals.
Whatever accepted methods are used, always make personal safety a priority.
abrasive selection, etc. Additional knowledge can be obtained from experienced users or trade journals.
Whatever accepted methods are used, always make personal safety a priority.
If there are questions or comments, please contact your local supplier or Walter Meier. Walter Meier can
also be reached at our web site: www.waltermeier.com.
also be reached at our web site: www.waltermeier.com.
Retain this manual for future reference. If the machine transfers ownership, the manual should
accompany it.
accompany it.