Brother MFC-9760 사용자 매뉴얼
26
Chapter 3
Printing on Thicker Paper and Card Stock
When the rear cover is lifted up, the machine has a straight paper path from the manual feed slot to
the rear of the printer. Use this paper feed and output method when you want to print on envelopes,
thicker paper or card stock.
the rear of the printer. Use this paper feed and output method when you want to print on envelopes,
thicker paper or card stock.
1
Select manual feed mode in the printer driver.
2
Send the print data as usual.
3
Lift up the rear cover of the machine.
4
Adjust the manual feed paper guides to the width of the paper you are using.
5
Insert a single sheet of paper into the manual feed slot until the front edge touches the paper feed
rollers. Let go of the paper as the machine pulls it into position.
rollers. Let go of the paper as the machine pulls it into position.
6
After the machine ejects the printed page, return to Step 5 to insert the next sheet of paper. The
machine will wait until you insert the next sheet of paper. Repeat Steps 5 and 6 for each page to
be printed.
machine will wait until you insert the next sheet of paper. Repeat Steps 5 and 6 for each page to
be printed.
7
When you have finished printing, close the rear cover of the machine.
To prevent the possibility of transparencies smudging as they stack in the output
bin, remove each transparency after it exits.
bin, remove each transparency after it exits.