Maytag mvwx600x 사용자 가이드

The Estimated Time Remaining display shows the time 

required for the cycle to complete. Factors such as load size 

and water pressure may affect the time shown in the display. 

Tightly packing, unbalanced loads, or excessive suds may 

cause the washer to adjust the cycle time, as well. 

Use the Wash Cycle knob to select available cycles on your 

washer. Turn the knob to select a cycle for your laundry load. 

See “Cycle Guide” for detailed descriptions of cycles.

To allow for proper load sensing and spinning,  

the lid will lock and the Lid Lock light will turn on. 

This light indicates that the lid is locked and cannot  

be opened.
If you need to open the lid, press START/Pause/

Unlock. The lid will unlock once the washer 

movement has stopped. This may take several 

minutes if the load was spinning at high speed.  

Press START/Pause/Unlock again to resume  

the cycle.

When you select a cycle, its default modifiers will light up. 

Not all cycles, options, and modifiers are available on all 

models.

Temperature Control senses and maintains uniform water 

temperatures by regulating incoming hot and cold water. 
Select a wash temperature based on the type of fabric 

and soils being washed. For best results and following 

the garment label instructions, use the warmest wash 

water safe for your fabric.  
•Warmandhotwatermaybecoolerthanwhatyour

previous washer provided.

•EveninaCoolwaterwash,somewarmwatermay

be added to the washer to maintain a minimum 

temperature.   

Soil Level (wash time) is preset for each wash cycle. As 

you press Soil Level, the cycle time (minutes) will increase 

or decrease in the Estimated Time Remaining display and 

a different wash time will appear. 
For most loads, use the Soil Level that is preset with the 

cycle you have chosen. For heavily soiled and sturdy 

fabrics, press Soil Level to select more wash time, if 

needed. For lightly soiled and delicate fabrics, press  

Soil Level to select less wash time, if needed. Lower  

Soil Level setting will help reduce tangling and wrinkling.

This washer automatically selects the spin speed  

based on the cycle selected. The preset speeds can  

be changed. Not all spin speeds are available with  

all cycles.
•Fasterspinspeedsmeanshorterdrytimes,but 

may increase wrinkling in your load. 

•Slowerspinspeedsmeanlesswrinkling,butwill 

leave your load more damp.

When you select a cycle, its default options will light up. Not 

all cycles, options, and modifiers are available on all models.

Use this option to add an extra agitation and soak time  

to the beginning of any cycle to break up tough stains.
FABRIC SOFTENER 

This option must be selected if using fabric softener  

during a cycle. It ensures that fabric softener is added  

at the correct time in the rinse for even distribution. 
EXTRA RINSE

This option can be used to automatically add a second 

rinse to most cycles. 
DEEP CLEAN 

This option provides enhanced cleaning action for tough 

stains. It will add additional agitation and soak time to  

the cycle. 
END SIGNAL

Use this option to adjust volume of the signal that sounds 

at end of cycle. You may select Hi, Low, or Off (no  

indicator lit). A louder signal is helpful in alerting you that 

the cycle is complete. 

You may also add or remove options for each cycle. Not all 

options can be used with all cycles, and some are preset to 

work with certain cycles.