Electrolux eiflw55irr 사용자 가이드
24
NOTE
The washer will automatically prompt you to
run the
run the
SYSTEM CLEAN cycle every 50 cycles.
You may press the
cancel button to manually
perform the cycle at another time.
Care & Cleaning
TO REFRESH WASH DRUM
Perform the
SYSTEM CLEAN cycle to refresh the
wash drum follow these steps:
Wake up the washer by pressing any button, ro-
1.
tate cycle knob to the
hand wash cycle, press
the
start button and then the cancel button.
Wake up the washer again by pressing any but-
2.
ton, then immediately and simultaneously press
and hold both the
and hold both the
eco friendly and control
lock buttons for 5 seconds, or until the LCD
display changes.
Remove all clothing from the drum, add 1 cup
display changes.
Remove all clothing from the drum, add 1 cup
3.
liquid chlorine bleach to the empty wash drum,
and press
and press
start.
This maintenance cycle uses hot water and two
rinses to remove residue that may cause odor.
rinses to remove residue that may cause odor.
IMPORTANT
DO NOT load garments or other items in the
washer when cleaning the inside of the washer.
washer when cleaning the inside of the washer.
OTHER INSIDE CLEANING
Before cleaning the washer interior, unplug the
•
electrical power cord to avoid electrical shock
hazards.
Dry around the washer door opening, flexible
hazards.
Dry around the washer door opening, flexible
•
gasket, and door glass. These areas should
always be clean to ensure a water tight seal.
When extremely soiled items have been
always be clean to ensure a water tight seal.
When extremely soiled items have been
•
washed, a dirty residue may remain on the
drum. Remove this by wiping the drum with a
nonabrasive household cleanser. Rinse thor-
oughly with water.
Periodically, wipe dry the folds in the bottom
drum. Remove this by wiping the drum with a
nonabrasive household cleanser. Rinse thor-
oughly with water.
Periodically, wipe dry the folds in the bottom
•
of the flexible gasket to remove lint and other
debris.
The drum vanes may become stained from fab-
debris.
The drum vanes may become stained from fab-
•
ric dye. Clean these parts with a nonabrasive
household cleanser to prevent dye transfer to
future loads.
household cleanser to prevent dye transfer to
future loads.