IQinVision iqd30sv-f1 설치 설명서
7
10
Interior Vandal Camera Model: using the supplied Torx T-10 security
wrench loosen the two tamper-proof screws holding the dome cover to the
camera assembly. Note that these screws are not captively held to the dome
cover. If lost, two spare tamper-proof screws are provided. If using a PoE
Ethernet cable coming through the wall, be sure to run this cable through the
cable pass-through in the camera base plate and connect it to the Ethernet port
on the camera as shown in Image 6.2.
wrench loosen the two tamper-proof screws holding the dome cover to the
camera assembly. Note that these screws are not captively held to the dome
cover. If lost, two spare tamper-proof screws are provided. If using a PoE
Ethernet cable coming through the wall, be sure to run this cable through the
cable pass-through in the camera base plate and connect it to the Ethernet port
on the camera as shown in Image 6.2.
Side 1
Side 2
Image 6.2
Cover Removal
Ethernet
Pass-Through
Pass-Through
Note: The H.264 (720p) camera models include an internal microphone.
The microphone is disabled by default.
The microphone is disabled by default.
If an external microphone or powered loudspeaker (not supplied) will be
connected to the mini dome camera use the supplied audio cable. Pass
the audio cable through the camera base plate and connect it to the audio
connector on the camera as shown in Image 6.3. External microphone and
powered loudspeaker (not supplied) will connect to the 3.5mm plugs.
connected to the mini dome camera use the supplied audio cable. Pass
the audio cable through the camera base plate and connect it to the audio
connector on the camera as shown in Image 6.3. External microphone and
powered loudspeaker (not supplied) will connect to the 3.5mm plugs.
Image 6.3