OKI ML520 사용자 가이드

After you've installed ribbon and paper, you are ready to
run the self tests. Do this any time you want to make sure
the printer is functioning properly.

Turn the printer

Turn the printer

off, then press

off, then press

and hold the 

and hold the

key while

 key while

turning the

turning the

printer back on.

printer back on.

Press SEL.

Press SEL.

Your printer has three emulations:

• IBM Proprinter III (factory default)

• Epson FX

• Okidata Microline Standard

Your printer is set at the factory for the IBM Proprinter III
emulation. To change the emulation:

1. Enter the Menu mode by holding the SHIFT button

while pressing the SEL button. The following line will
print:

Printer Control

Emulation Mode

IBM PPR

2. Press the SET button until the emulation you wish to

select prints.

3. Exit the Menu and save your setting by holding the

SHIFT button while pressing the SEL button.