Seagate blackarmor ps 110 사용자 가이드

13.2 Security

Please note the following: if the power goes out or you accidentally press RESET during the
transfer, the procedure will be incomplete and you will have to partition and format or clone
the hard disk again.
No data will be lost because the original disk is only being read (no partitions are changed or
resized).
Nevertheless, we do not recommend that you delete data from the old disk until you are
sure it is correctly transferred to the new disk, the computer boots up from it and all
applications work.

13.3 Executing transfers

13.3.1 Selecting Clone mode

You will see the Clone Mode window just after the welcome window.

We recommend using automatic mode in most cases. The manual mode can be useful if you
need to change the disk partition layout.
If the program finds two disks, one partitioned and another unpartitioned, it will
automatically recognize the partitioned disk as the source disk and the unpartitioned disk as
the destination disk. In such a case, the next steps will be bypassed and you will be taken to
the cloning Summary screen.

13.3.2 Selecting source disk

If the program finds several partitioned disks, it will ask you which one is the source (i.e. the
older data disk).