Seagate replica usb 2.0 250gb 사용자 가이드
Seagate Replica User Guide
10
and navigate to Replica Support. Download the hard disk recovery image file (file type: .iso)
to your desktop or another folder of your choice. You will use this image file to create a new CD-ROM.
3. Double-click on the icon for the downloaded image file. This launches the application where you can create CDs.
4. Follow the procedures in the application that lets you burn the downloaded image to the CD. Unlike merely copying the file to
the CD, burning the image creates a CD that your computer can boot up from.
5. After the image is burned to the CD-ROM, remove the CD from the drive and label it “Seagate Replica Hard Disk Recovery”.
Store it in a safe location.
3. Double-click on the icon for the downloaded image file. This launches the application where you can create CDs.
4. Follow the procedures in the application that lets you burn the downloaded image to the CD. Unlike merely copying the file to
the CD, burning the image creates a CD that your computer can boot up from.
5. After the image is burned to the CD-ROM, remove the CD from the drive and label it “Seagate Replica Hard Disk Recovery”.
Store it in a safe location.
Recovering your Hard Disk
To perform a full hard disk recovery, follow these steps:
1. Replace the malfunctioning hard disk with a new hard disk according to the hardware instructions.
2. Insert your Replica CD-ROM, or the updated CD-ROM you made in “Creating an Updated CD-ROM for Hard Disk Recovery”, into
the CD-ROM drive as follows: Turn on the power to the computer long enough to open the CD-ROM drive and insert the Replica
CD¬ROM. Close the CD-ROM drive. Turn off the power to the computer.
3. Connect Replica to the computer USB port.
4. Turn on the power to your computer. The computer should start and boot from the Replica CD-ROM. If it does not, you may need to
make changes to the system BIOS to permit booting the computer from the CD-ROM. See the documentation for your computer for
detailed instructions on how to do this.
5. Follow the on-screen instructions provided by the recovery software. You must select a recovery point, which is typically the date of
the most recent backup. Replica restores your entire computer onto the new hard disk, exactly as it was at the selected backup time.
Caution: Do not interrupt the recovery process. It is likely to take several hours. Replica will prompt you when your system has
been recovered.
6. Once Replica has recovered your computer on the new hard drive, it engages to provide continuous backup of your computer.
To perform a full hard disk recovery, follow these steps:
1. Replace the malfunctioning hard disk with a new hard disk according to the hardware instructions.
2. Insert your Replica CD-ROM, or the updated CD-ROM you made in “Creating an Updated CD-ROM for Hard Disk Recovery”, into
the CD-ROM drive as follows: Turn on the power to the computer long enough to open the CD-ROM drive and insert the Replica
CD¬ROM. Close the CD-ROM drive. Turn off the power to the computer.
3. Connect Replica to the computer USB port.
4. Turn on the power to your computer. The computer should start and boot from the Replica CD-ROM. If it does not, you may need to
make changes to the system BIOS to permit booting the computer from the CD-ROM. See the documentation for your computer for
detailed instructions on how to do this.
5. Follow the on-screen instructions provided by the recovery software. You must select a recovery point, which is typically the date of
the most recent backup. Replica restores your entire computer onto the new hard disk, exactly as it was at the selected backup time.
Caution: Do not interrupt the recovery process. It is likely to take several hours. Replica will prompt you when your system has
been recovered.
6. Once Replica has recovered your computer on the new hard drive, it engages to provide continuous backup of your computer.