Runco rs 440lt 사용자 가이드
Runco RS-440 Installation/Operation Manual
23
PRE
L
IMINAR
Y
3.6
Connections to the
RS-440
Connections to the
RS-440
Proceed as follows to connect the RS-440 to your video sources, external controller(s) – if
present – and AC power.
present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
Connector Panel Access
To access the connector panel, pull firmly on the cable access cover to open it.
Connecting Source
Components to the
RS-440
Components to the
RS-440
Connect your video sources to the RS-440 as shown and described in the sections that
follow.
follow.
HDMI/DVI Connections: See Figure 3-9.
Use the HDMI input whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
Tip