Garmin 3200 참조 가이드

6

1.  With the QueGPS page open, tap the 

 application tab or 

the 

icon 

 to display the Options Menu.

2.  Observe the list of options:

•  Select 

to display the GPS preference options.  

•  Select 

 when initializing the GPS Receiver if you 

have moved over 600 miles from your last use location or if 
you have not powered up the unit in over thirty (30) days.

•  When in 2D mode, select 

 to reset the 

elevation.

1.  Tap the 

option to display the GPS Preferences Menu.

2.  Observe the list of options with check boxes:

•  Tap 

to enable the Wide Area Augmentation 

System operating mode.  (See “Additional Information about 
WAAS” in the Appendix of this guide.)

•   Tap 

 to change the rate at which the GPS 

receiver updates your position data to conserve battery power.  
The GPS receiver slows the frequency at which it calculates 
your location and therefore requires less battery power.  There 
is a slight loss in position accuracy when 

 is on.  

 

You cannot operate in the WAAS and Battery Saver modes at 
the same time.  If you attempt to check both boxes, a message 
displays and the last option checked remains on after you tap 
the message’s 

 button.