Garmin 4008 사용자 매뉴얼
GPSMAP 4000 Series Owner’s Manual
G
ettInG
S
tarted
G
ett
In
In
G
s
tarted
Viewing System Information
You can view your unit’s software version, basemap version, unit ID number, and your XM weather
Radio ID (if available). You may need this information to update the system software or purchase
additional map data information.
From the Home screen, select
Configure
>
System
>
System Information
.
Using the Simulator Mode
Simulator mode turns the GPS receiver off for use indoors or for practice. The unit does not track
satellites in simulator mode.
CAUTION: Do not try to navigate using simulator mode because the GPS receiver is turned off.
Any satellite signal strength bars shown are only simulations and do not represent the strength of
actual satellite signals.
To turn on Simulator Mode
1. From the Home screen select
Configure
>
System
>
Simulator
.
2. Select
On
to turn the simulator mode on. Select
Setup
to set speed, track control, position,
simulator time, and simulator date.
Understanding the Home Screen
Use the Home screen to access all other screens.
NOTE: Options on this screen vary based on the unit type.
Charts—access Navigation, Mariner’s Eye, Mariner’s Eye 3D, Fish Eye 3D, Fishing Charts
).
NOTE:
Mariner’s Eye 3D, Fish Eye 3D, and Fishing Charts
are available only if you use a
BlueChart g2 Vision SD card.
).
NOTE: The radar option is available only if you have a Garmin Marine Radar connected.
NOTE: The sonar option is available only if you have a Garmin sonar module connected.
•
•
•