Garmin 4008 사용자 매뉴얼

u

SInG

 r

adar

 

When connected to an optional Garmin Marine Radar such as a GMR 404/406 or GMR 18, you can 

view more information about your surroundings. The radar connects through the Garmin Marine 

Network and shares radar data with every chartplotter connected to the network.
The Garmin Marine Radar transmits a narrow beam of microwave energy as it rotates in a 360 

pattern. When the transmitted energy contacts a target, some of that energy is reflected back to the 

radar. You choose how to display the received data on the chartplotter.

  WARNING: The marine radar transmits microwave energy that has the potential to be harmful to 

humans and animals. Before beginning radar transmission, verify that the area around the radar is 

clear. The radar transmits a beam approximately 12° above and below a line extending horizontally 

from the center of the radar. Avoid looking directly at the radar, because the eyes are the most 

susceptible part of the body.

1.  When you power on the network, the radar warms up. A countdown is provided to alert you

when the radar is ready. From the Home screen, press

.

As a safety feature, the radar enters standby mode after it warms up. This gives the

operator an opportunity to verify that the area around the scanner is clear before beginning

radar transmission. It is important to remember that the microwave energy transmitted by

the scanner can potentially be dangerous.

2.  When the message “Ready to Transmit” appears in the center of the radar display, press and

release the  

button on the chartplotter (do not hold the button, or you may shut

down the chartplotter.), or press

.

3.  On the bottom right of the screen, select

. A “Spinning Up” message will

appear for a few moments, then the radar begins painting an image.

➋

➌

➊

1.  When you would like to stop transmitting with the radar, press and release the  

button on the chartplotter (do not hold the button, or you may shut down the chartplotter.), or

press

.

2.  On the bottom right of the screen, select

.

•