Aigo dc-t1000 사용자 가이드
Chapter 4: Recording Photos, Videos and Voices
Using the Record Menu
31
The table below shows the available Drive mode settings.
Setting the AEB
AEB stands for Automatic Exposure Bracketing. This feature captures the same
image with 3 different exposure settings.
image with 3 different exposure settings.
• The settings are recorded in the following order: standard exposure, under
exposure, and over exposure.
• Available settings are: [On] and [Off].
To set AEB
1. From the Record menu, select AEB.
2. Use the
keys to go through the
selection.
3. Press the SET button to save and apply
changes.
Setting the AF Area
AF stands for Automatic Focus. This feature
determines the area on which the camera
focuses.
To set AF Area
1. From the Record men, select AF Area.
2. Use the
keys to go through the
selection.
Icon
Item
Description
10 Sec Self-timer
Sets a 10-second delay to capture image after
pressing the shutter button.
pressing the shutter button.
2 Sec Self-timer
Sets a 2-second delay to capture image after
pressing the shutter button.
pressing the shutter button.
Double Self-timer
Performs delay and capture twice:
• Performs a 10-second delay, then captures the
image.
• Performs
another
2-second delay then cap-
tures the image again.
Burst
Performs continuous shooting when the shutter
button is pressed. Stops shooting when the shutter
button is released.
button is pressed. Stops shooting when the shutter
button is released.
Off
Captures an image without time delay.
10
2
x
2
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
OFF
OFF
On
Off
OFF
or
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
OFF
OFF
Face Tracking
Wide
Center
or