Casio gw9200-1 사용자 가이드

10

1. In the Timekeeping Mode, hold down A until the city code starts to flash,

which indicates the setting screen.

2. Use E and B to select the city code you want.

• Make sure you select your Home City code before changing any other

setting.

• For full information on city codes, see the “City Code Table”.

3. Press D to move the flashing in the sequence shown below to select the

other settings.

Year

Seconds

Hour

Minutes

Day

Month

12/24-Hour
Format

Power
Saving

Barometric 
Pressure Unit

Altitude Unit

Temperature 
Unit

City Code

DST

• The following steps explain how to configure timekeeping settings only.

4. When the timekeeping setting you want to change is flashing, use E and/

or B to change it as described below.

Use E (east) and
B(west).
Press E.

Press E.

Change the city code

Cycle between Auto DST (

AvtA

),

Daylight Saving Time (

ON

) and

Standard Time (

OFF

).

Toggle between 12-hour (

12H

)

and 24-hour (

24H

) timekeeping.

ON

5. Press A to exit the setting screen.

• Auto DST (

AvtA

) can be selected only while 

LON

, 

PAR

, 

BER

, 

ATH

,

HKG

, 

TPE

, 

TYO

, 

LAX

, 

DEN

, 

CHI

, or 

NYC

 is selected as the

Home City code. For more information, see “Daylight Saving Time (DST)”
below.

• You also need to enter the Timekeeping Mode in order to configure the

following settings.

Power saving on/off (“To turn Power Saving on and off”)
Temperature, barometric pressure, and altitude units (“To select the
temperature, barometric pressure, and altitude units”)

Press E.

Use E (+) and B (–).

Reset the seconds to 

00

Change the hour or minutes

Change the year, month, or day

Daylight Saving Time (summer time) advances the time setting by one hour
from Standard Time. Remember that not all countries or even local areas use
Daylight Saving Time.
The time calibration signals transmitted from Mainflingen (Germany), Anthorn
(England), or Fort Collins (the United States) include both Standard Time and
DST data. When the Auto DST setting is turned on, the watch switches
between Standard Time and DST (summer time) automatically in accordance
with the signals.

• Though the time calibration signal transmitted by the Fukushima and

Fukuoka/Saga, Japan transmitters include summer time data, summer time
currently is not implemented in Japan (as of 2007).

• The default DST setting is Auto DST (

AvtA

) whenever you select 

LON

,

PAR

, 

BER

, 

ATH

, 

HKG

, 

TPE

, 

TYO

, 

LAX

, 

DEN

, 

CHI

, or 

NYC

as your Home City code.

• If you experience problems receiving the time calibration signal in your

area, it probably is best to switch between Standard Time and Daylight
Saving Time (summer time) manually.

1. In the Timekeeping Mode, hold down A until

the city code starts to flash, which indicates
the setting screen.

2. Press D and the DST setting screen appears.
3. Use E to cycle through the DST settings in

the sequence shown below.

Auto DST (

A

vtA

)

DST off (OFF)

DST on (ON)

• If you change your Home City to one that is within the same transmitter

area, the current DST setting will be retained. If you change to a city that is
outside your current transmitter area, DST will be turned off automatically.
Transmitter area city codes

• 

HKG

,

 

TPE

,

 

and

 

TYO

• 

LAX

,

 

DEN

,

 

CHI

,

 

NYC, ANC

, and

 

HNL

• 

LON

,

 

PAR

,

 

BER

, and

 

ATH

• All other city codes

4. When the setting you want is selected, press A to exit the setting screen.

• The DST indicator appears to indicate that Daylight Saving Time is turned on.

DST indicator

This section contains more detailed and technical information about watch
operation. It also contains important precautions and notes about the various
features and functions of this watch.

• The watch returns to the Timekeeping Mode automatically if you do not

perform any button operation for two or three minutes in the Data Recall,
Alarm, Receive, or Barometer/Thermometer Mode.

• If you do not perform any button operation for 21 or 22 hours while in the

Altimeter Mode, the watch will return to the Timekeeping Mode
automatically.

• If you leave a screen with flashing digits on the display for two or three

minutes without performing any operation, the watch exits the setting
screen automatically.

When you enter the World Time or Alarm Mode, the data you were viewing
when you last exited the mode appears first.

The E and B buttons are used on the setting screen to scroll through data
on the display. In most cases, holding down these buttons during a scroll
operation scrolls through the data at high speed.

Subjecting the watch to strong impact can cause sensor malfunction or
improper contact of internal circuitry. When this happens, 

ERR

 (error) will

appear on the display and sensor operations will be disabled.

• If 

ERR

 appears while a measurement operation is being performed in a

sensor mode, restart the measurement. If 

ERR

 appears on the display

again, it can mean there is something wrong with the sensor.

• Even if battery power is at Level 1 or Level 2, the Barometer/Thermometer

Mode or Altimeter Mode sensor may be disabled if there is not enough
voltage available to power it sufficiently. In this case, 

ERR

 will appear on

the display. This does not indicate malfunction, and sensor operation should
resume once battery voltage returns to its normal level.

• If 

ERR

 keeps appearing during measurement, it could mean there is a

problem with the applicable sensor.

Whenever you have a sensor malfunction, be sure to take the watch to
your original dealer or nearest authorized CASIO distributor as soon as
possible.

The button operation tone sounds any time you
press one of the watch’s buttons. You can turn the
button operation tone on or off as desired.

• Even if you turn off the button operation tone,

the alarm, Hourly Time Signal, and Countdown
Timer Mode alarm all operate normally.

In any mode (except when a setting screen is on
the display), hold down D to toggle the button
operation tone on (MUTE not displayed) and off
(MUTE displayed).

• Since the D button is also the mode change button, holding it down to turn

the button operation on or off also causes the watch’s current mode to
change.

• The MUTE indicator is displayed in all modes when the button operation

tone is turned off.

Mute indicator

When turned on, Power Saving enters a sleep
state automatically whenever the watch is left for
a certain period in an area where it is dark. The
table below shows how watch functions are
affected by Power Saving.

• There actually are two sleep state levels:

“display sleep” and “function sleep”.

60 to 70 minutes

(Display Sleep)

6 or 7 days

(Function Sleep)

Blank, with
PS flashing

Blank, with
PS not flashing

Display is off, but all functions
are enabled.

All functions are disabled, but
timekeeping is maintained.