Garmin 5000 사용자 가이드

Getting Started

1.  Plug the vehicle power cable into the 

power connector on the right side of 

the cradle. 

2.  Clean and dry your windshield with 

a lint-free cloth. Remove the clear 

plastic from the suction cup. Place 

the suction cup on the windshield. 

3.  Flip the lever back, toward the 

windshield.

4.  Snap the cradle onto the suction cup 

arm.

5.  Fit the bottom of your nüvi into the 

cradle.

6.  Tilt the nüvi back until it snaps into 

place.

7.  Plug the other end of the vehicle 

power cable into a power outlet in 

your vehicle. Your unit should turn 

on automatically if it is plugged in 

and the vehicle key is turned to the 

ON/ACC position.

8.  If you are using a traffic receiver in

Europe, secure the traffic receiver’s

antenna to the windshield using the 

suction cups.

Use the enclosed mounting disk to 

mount your unit to the dashboard and 

comply with certain state regulations.