Valcom v1080 전단

The V-1080 Flexhorn shall consist of a high efficiency re-entrant type weather-proof horn, built-in amplifier with

> 600 ohm input impedance and built-in volume control.  It shall be equipped with a universal mounting bracket,
volume control and an "I" beam clamp.

The frequency response of the horn shall be 400 Hz to 10 kHz The horn shall have a continuous power rating

of 3 watts.  Dispersion shall be 120 degrees horizontal and 90 degrees vertical.

The housing shall be constructed of filled polypropylene and be available in gray, white or beige. All hardware

shall be stainless steel. The universal bracket shall be constructed of 16 awg CRS and finished with a weather
resistant black E-Coat.

The amplifier shall have a frequency response of 400 Hz to 10 kHz.  Amplifier audio impedance shall be > 600

ohms. Amplifier audio input shall be -10 dBm line level at rated output of 4 watts RMS.  Signal to noise ratio shall be
-70 dB.

The amplifier shall operate on a -24 Vdc nominal, positive ground power supply.  Operating current shall be

200 mA at -24 Vdc.  Operating temperatures shall be  -4 to +131 °F (-20 to +55 °C).

A screwdriver adjustable volume control shall be provided on the unit.  This volume control shall be externally

accessible, making it possible to adjust the volume control without removal of the unit.

Dimensions of the horn shall be 6.8" (17.3 cm) H x 8.3" (21.1 cm) W x 3.3" (8.4 cm) D.  The weight shall be

2.75 lbs (1.25 kg).

Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions

of normal use and service for a period of one year from the date of shipment.  The obligation under this warranty shall be
limited to the replacement, repair or refund of any such defective device within the warranty period, provided that:

1.  inspection by Valcom, Inc. indicates the validity of the claim,

2.  the defect is not the result of damage, misuse, or negligence after the original shipment,

3.  the product has not been in any way repaired by others and that factory sealed units are unopened.
    (A service charge plus parts and labor will be applied to units defaced or physically damaged).

4.  freight charges for the return of products to Valcom, Inc. are prepaid,

5.  all units “out of warranty” are subject to a service charge.  The service charge will cover minor repairs
    (major repairs will be subject to additional charges for parts and labor).

This warranty specifically excludes damage incurred in shipment.  In the event a product is received in damaged

condition, the carrier should be notified immediately.  Claims for such damage should be filed with the carrier involved in
accordance with the F.O.B. point.