Visioneer lx 200 사용자 가이드
16
Turning the LCD On and Off
By default, the LCD automatically turns on
when the camera is powered on. Press to
turn the LCD on or off.
when the camera is powered on. Press to
turn the LCD on or off.
Using the Display ON/OFF Button:
1. Press once to turn the LCD icons off.
2. Press again to turn the LCD off.
3. Press to turn the LCD on.
1. Press once to turn the LCD icons off.
2. Press again to turn the LCD off.
3. Press to turn the LCD on.
Camera Ready LED Status
When the Camera Ready LED is:
1. Steady
The camera is in capture mode. Please hold the
camera steady during this time; otherwise, the image
may come out blurry. (fig.1.5)
1. Steady
The camera is in capture mode. Please hold the
camera steady during this time; otherwise, the image
may come out blurry. (fig.1.5)
2. Blinking
The flash is recharging or the camera is in storage mode. You may move
the camera in this mode. (fig.1.5)
The flash is recharging or the camera is in storage mode. You may move
the camera in this mode. (fig.1.5)
Note: Do not open the Battery & Memory Card Door or turn the power
off while the Camera Ready LED is steady or blinking; otherwise, the
images or video clips in the camera may be damaged.
off while the Camera Ready LED is steady or blinking; otherwise, the
images or video clips in the camera may be damaged.
A
005/080
AWB
1600
A
A
A
A
A
T
fig.1.5
Visioneer LX 200-E (513114-00) 11/11/02 10:58 am Page 16