Pyle ppg460a 전단
1) Voltage Selector: AC 110/220 Volt Selectable Switch.
2) Power Cord: Connect cord to an AC outlet.
2) Power Cord: Connect cord to an AC outlet.
Specifications
1
3
4
5
6
7
8
9
10
11
1
2
Model
Driver
RMS
Peak
Dimensions
Weight
PPG460A
30W
150W
8" High
Definition
Speaker
1) Power Switch: Switches amplifier on/off.
2) Power LED: Illuminates when power is switched on.
3) Input Jack: Connect your instrument to this jack.
4) Master: Adjusts overall volume.
5) Volume: This sets the volume gain level.
6) Bass: This control adjusts the low frequency level.
7) Mid: This control adjusts the middle frequency level.
8) Treble: This control adjusts the high frequency level.
9) Bass Expander: Toggles an extra bass effect.
10) Output Jack: Lets you output a line level signal
(non-amplified). Internal speaker is not disabled.
11) Phones: This is your headphone connection. Inserting
the headphones disables the internal speaker
(great for practicing).
2) Power LED: Illuminates when power is switched on.
3) Input Jack: Connect your instrument to this jack.
4) Master: Adjusts overall volume.
5) Volume: This sets the volume gain level.
6) Bass: This control adjusts the low frequency level.
7) Mid: This control adjusts the middle frequency level.
8) Treble: This control adjusts the high frequency level.
9) Bass Expander: Toggles an extra bass effect.
10) Output Jack: Lets you output a line level signal
(non-amplified). Internal speaker is not disabled.
11) Phones: This is your headphone connection. Inserting
the headphones disables the internal speaker
(great for practicing).
W=13"
H=16"
D=9 3/4"
H=16"
D=9 3/4"
18.3 lbs
2
3
2
Troubleshooting
Distorted Sound:
Check if the amplifier is overdriven. If it is, you will
have to turn the level down.
Check signal source.
Try disabling Bass Expander.
Try disabling Bass Expander.
Signal sounds discolored:
Check and adjust the EQ settings.
Ensure you are using quality cables.
Check signal source.
Ensure you are using quality cables.
Check signal source.
No Sound:
Check connections.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.
Try a different cable.
Check level on amplifier.
Confirm amplifier is getting a signal.
Make sure nothing is plugged into the Phones jack.
Intermittent Output:
Check connections.
Try a different cable.
Try a different cable.