Pyle ppgw1040 사용자 설명서

PARTS DESCRIPTION

3

TROUBLESHOOTING

If you are having trouble with your amplifier, these instructions below may

help you before you call a service technician.

1. Check that the power cord is plugged into a power outlet.

2. Check that the power is turned on at the outlet. If you are at a gig, make 

sure the stage power has been turned on.

3. Check that the control knobs have been sufficiently turned up.

4. Check that the instrument is correctly plugged into the amplifier, both at 

the instrument and at the amplifier input.

5. Check the instrument lead -faulty leads are one of the most common 

causes of problems.

6. Check that the volume is turned up on the instrument.

If your amplifier still does not function, contact your local  dealer  or an 

authorized service agent.

6

LOW BAT

ON  MUTE

MIC/LINE

AUDIO POWER ATTENUATION  POWER

OFF  ON

0dB

-20dB

9

V

 +

AUDIO OUTPUT JACK

AUDIO SWITCH

VOLUME SWITCH

POWER SWITCH

LOW BATTERY LED

POWER LED

BATTERY COVER

ANTENNA

BELT CLIP

1. Open the battery cover to install a 9V battery as per correct polarities. 

Move  the power switch to ON position, the power indicator will be 

green to show normal operation. If the LOW BAT indicator 

2. Plug the 3.5mm plug of supplied connector to screw-lock socket of 

transmitter. Plug the other end 6.35mm plug to your guitar output jack.

3. ATTENUATION is for volume adjustment. Move it to 0dB position to 

get normal volume output, or to -20dB position to reduce distortion 

and avoid humming.

4. If the system will not be used for a long time, please switch off the 

transmitter to avoid power consumption.

indicator 

illuminates, this indicates the voltage is not enough for operation. 

Replace the 9V battery.

AUDIO CABLE