Pyle pt910 사용자 매뉴얼

Lets you connect a pair of stereo

headphones for private listening

or cueing (monitoring) sound prior

to ÒairingÓ it.

PYLE PRO PT-910 Amplifier OwnerÕs Manual  Ð 1

This special circuitry protects

the amplifier and speaker system

from being damaged by

overdriving power levels.

Indicator lights remind the user

to reduce the volume when

amplifier output is execessive.

This LED is illuminated when

a thermal overload condition

is present or if a shorted load

occurs on the amplifier

output. The amplifier resets

itself when the problem is

corrected.

Indicates the total stereo

output signal level

Select the speakers you want to

use with the amplifier in Channel

A, Channel B, or both (for use

with 8 ohm speaker only).

Controls the sound level for each of the

audio input sources

Mic 4 / PHONO Allows you to adjust

volume of connected Mic4 or turntable.

CD/AUX Allows you to adjust volume of

CD or auxiliary sound source.

Controls the audio

feedback.

Lets you regulate the sound level of

left and right speakers.

Connect up to four

high-impedance

microphones to your

amplifier

Cooling system is automatically

activated whenever the

amplifier is turned on. This

forced air cooling system

rapidly exhausts interior heat

to reduced operating

temperature

Connect up to four microphones

to your amplifier, via a 1/4"

unbalanced cable, for left and

right mono sound.

Connect stereo input

sources (CD or DVD

player, TV, etc.) here, via

a 1/4"(balanced) audio

cable.

Connect input sources (CD or

DVD player, TV, etc.) here, via

an unbalanced audio cable.

Match the colors on your cable

connections with the colors on

the jacks.

Select MIC 4 or PHONO

input.

Connect your turntable here.
MIX BUS Jack

Connect an extra amplifier if you

have multiple audio sources.

Connect any high-level sound source

for music or special effects.

Connect two sets of

speakers (Left and

Right, for A and B)

Select EQ if you are using an

equalizer or BYPASS if you

are not using the jacks.     

       

                       

    

           

Select bridged mono input mode in

combination with a mono signal source

plugged into the left channel.

Connect an equalizer or other external processor.