Pyle plcd69mp3 사용자 가이드
• SET THE CLOCK
Press the DSP button (15), and the
clock is shown on the display.
Then hold down the button until the
clock flashes. Then press the
MANU/SKIP button (17) to change
hours or MANU/SKIP button (16) to
change minutes.
clock is shown on the display.
Then hold down the button until the
clock flashes. Then press the
MANU/SKIP button (17) to change
hours or MANU/SKIP button (16) to
change minutes.
• SELECT MODE
Press MOD button (6) to choose
desired listening mode.
(e.g. radio mode to CD mode to
AUX IN mode)
desired listening mode.
(e.g. radio mode to CD mode to
AUX IN mode)
• MUTE
Press MUT button (2) to silence the
receiver. Press it again to release the
mode.
receiver. Press it again to release the
mode.
• LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (8).
functions on the display (8).
• EQUALIZATION
Press EQ button (23) to turn on
equalization function and to select
desired audio mode. There are five
kinds of mode as below:
equalization function and to select
desired audio mode. There are five
kinds of mode as below:
FLAT
CLASSIC
POP M
ROCK M
DSP OFF
• AUXILIARY INPUT
The unit can be connected to a
portable audio player through the AUX
IN jack (7).
portable audio player through the AUX
IN jack (7).
• REMOTE SENSOR
Point the remote control handset to
the remote sensor IR (26).
Press the function keys on the handset
to control the system.
the remote sensor IR (26).
Press the function keys on the handset
to control the system.
• RESET
RESET button (25) must be activated
with either a ball point pen or thin metal
object. RESET button (25) is to be
activated for the following reasons:
with either a ball point pen or thin metal
object. RESET button (25) is to be
activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
Note: If press RESET button (25), the
unit can’t work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the back of the
front panel.
unit can’t work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the back of the
front panel.
8
OPERATION