Pyle plcd87 사용자 매뉴얼
9
• AUTOMATICALLY MEMORY
STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press AMS button (18) for several
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished. And then 6
strongest stations are stored into the
corresponding preset number
button.
seconds, the radio searches from
the current frequency and checks
the signal strength until one cycle
search is finished. And then 6
strongest stations are stored into the
corresponding preset number
button.
- Program Scanning
Press AMS button (18) shortly to
scan preset station. When the field
strength level is more than the
threshold level of stop level, the radio
is holding at that preset number for
several seconds with releasing mute,
then searches again.
scan preset station. When the field
strength level is more than the
threshold level of stop level, the radio
is holding at that preset number for
several seconds with releasing mute,
then searches again.
• STATION STORING
Press any one of the preset buttons
(14) (M1 to M6) to select a station
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the
number button.
(14) (M1 to M6) to select a station
which had been stored in the memory.
Press this button for several seconds,
current station is stored into the
number button.
CD OPERATION
• SELECT TRACKS
During CD operation, press
TUNE/TRACK button (17) or
TUNE/TRACK (16) to move to the
previous track or the following track.
Track number shows on display.
During CD operation, hold
TUNE/TRACK button (17) or
TUNE/TRACK button (16) to fast
reverse or fast forward. CD play starts
from when you release the button.
TUNE/TRACK button (17) or
TUNE/TRACK (16) to move to the
previous track or the following track.
Track number shows on display.
During CD operation, hold
TUNE/TRACK button (17) or
TUNE/TRACK button (16) to fast
reverse or fast forward. CD play starts
from when you release the button.
• PAUSE PLAYING
Press PAU button (19) to pause CD
player. Press it again to resume play.
player. Press it again to resume play.
• REPEAT THE SAME TRACK
During CD operation, press RPT
button (21) to continuously repeat the
same track. Press again to stop repeat.
button (21) to continuously repeat the
same track. Press again to stop repeat.
• PREVIEW ALL TRACKS
During CD operation, press SCN
button (20) to play first several seconds
of each track on the current disc.
Press again to stop intro and listen to
track.
button (20) to play first several seconds
of each track on the current disc.
Press again to stop intro and listen to
track.
• PLAY ALL TRACKS IN RANDOM
During CD operation, press SHF
button (22) to play all tracks on CD in
random order. Press again to cancel
the function.
button (22) to play all tracks on CD in
random order. Press again to cancel
the function.
• COLOR BUTTON
Press the COL button (4) to adjust the
color of the LCD display. There are 7
kinds of color to be selected.
color of the LCD display. There are 7
kinds of color to be selected.
NOTE ON CD-R/CD-RW DISCS
• On this unit, in addition to an audio
CD, you can play your original CD-R
or CD-RW that contains audio titles.
or CD-RW that contains audio titles.
• However, depending on the condition
of the recording equipment or the CD-
R or CD-RW itself, some CD-Rs or CD-
RWs cannot be played on this nite.
R or CD-RW itself, some CD-Rs or CD-
RWs cannot be played on this nite.
• DO NOT stick paper or tape, etc, onto
label side or the recording side of any
CD-R/CD-RW, as it may cause a
malfunction.
CD-R/CD-RW, as it may cause a
malfunction.
OPERATION