Pyle pldvd168 사용자 가이드

Notes:

• Choose the mounting location where the unit will not interfere with the normal 

driving function of the driver.

• Before finally installing the unit, connect the wiring temporarily and make sure it is 

all connected up properly and the unit and the system work properly.

• Use only the parts included with the unit to ensure proper installation.  The use of 

unauthorized parts can cause malfunctions.

• Consult with your nearest dealer if installation requires the drilling of holes or other 

modifications of the vehicle.

• Install the unit where it does not get in the driver’s way and cannot injure the 

passenger if there is a sudden stop, like an emergency stop.

• If installation angle exceeds 30˚ from horizontal, the unit might not give its optimum

performance.

• Avoid installing the unit where it would be subject to high temperature, such as from

direct sunlight, or from hot air, from the heater, or where it would be subject to dust,
dirt or excessive vibration.

This unit can be properly installed either from “Front” (conventional DIN Front-mount)
or “Rear” (DIN Rear-mount installation, utilizing threaded screw holes at the sides of the
unit chassis).  For details, refer to the following illustrated installation methods.

30˚

5