Pyle pldvd170 사용자 가이드
ENTER
SEEK+
SEEK-
To start playback from the menu screen
To pause playback
To stop playback
To power on/off the player
To remove the disc
About this owner's manual
1 Press
/
/
/
or the number buttons on the remote to select the title you want.
-- title number over 10
To input 13: press 1 and 3 .
--
To input 25: press 2 and 5 ;
To input 112: press 1and 1then2.
To input 112: press 1and 1then2.
2 P
The DVD player begins playback from the selected title.
When not using the menu screen of a PBC- featured VIDEO CD,
set "PBC" to "off " via the on-screen displays.
set "PBC" to "off " via the on-screen displays.
5 6 3 4
MP3 discs
ress ENTER button
Press
or
during playback.
To resume normal playback, press this button again.
Each time you press
Each time you press
or
, change PAUSE, PLAY mode in turn.
Press STOP
.
1 During playback , press PWR on the
or
front panel more than 1 second
press POWER
on the remote. the player power off.
Press EJECT
button .
The DVD player ejects the disc automatically.
This owner's manual explains the basic instructions of this DVD player. Some DVD
discs are produced in a manner that allows specific or limited operation during playback.
discs are produced in a manner that allows specific or limited operation during playback.
As such, the DVD player may not respond to all operating commands. This is not a
defect in the DVD player. Refer to the instruction notes of discs.
"
"
"may appear on the TV screen during operation.
A "
" means that the operation is not permitted by the DVD player or the disc.
12
2 After the player power off, press PWR or POWER button again, the playback starts.
Playing a disc
Note: press PWR on the front panel less than 1 second,
the playback changes between DVD player and Radio mode.
If you do not power off the unit before turning off the ignition,
the unit will power on from the beginning regardless of the mode(DVD, Radio)
where you turned off the ignition.
the playback changes between DVD player and Radio mode.
If you do not power off the unit before turning off the ignition,
the unit will power on from the beginning regardless of the mode(DVD, Radio)
where you turned off the ignition.
Play position memory function
Even if you turn power off or switch the ignition key to OFF during playback or change
the video source, playback will continue from the point where playback stopped when
the power is turned ON again.
The play position memory is released if the disc is removed or the Reset button is pressed.
the video source, playback will continue from the point where playback stopped when
the power is turned ON again.
The play position memory is released if the disc is removed or the Reset button is pressed.