Pyle plrd143f 사용자 가이드
Caution
Use extra caution with any liquids in your car. If you or your child spill any liquid on
these products, pull your vehicle to the roadside and trun the key off to disconnect
or wipe the products with a towel.Do not operate the equipment until all liquids
have eihter evaporated or you have had the monitor inspected at a service
center by a qualified Technician. Severe harm or death can occur!
these products, pull your vehicle to the roadside and trun the key off to disconnect
or wipe the products with a towel.Do not operate the equipment until all liquids
have eihter evaporated or you have had the monitor inspected at a service
center by a qualified Technician. Severe harm or death can occur!
Do not mount the product where it will
obstruct the deployment of the airbag or
in an area where it would affect the
vehicular control. Also be careful to avoid
mounting the product where it can become hazardous during sudden stops
or in the event of an accident.
or in the event of an accident.
Make sure to keep products away from heater ducts or vents and out of direct
sunlight. Do not mount forward of the driver's shoulders.
sunlight. Do not mount forward of the driver's shoulders.
WARNING
There are two kinds of alarm symbols as folIows:
Please read and observe all warnings and instructions in this owner's manual
and those marked on the unit.Retain this booklet for future reference.
and those marked on the unit.Retain this booklet for future reference.
The driver should never operate these products while the vehicle is in motion!
Be careful not to overload your cigarette lighter plug by adding more than one
device at a time.
device at a time.
Installation of all TV monitors must be out of the driver's field of vision!
Do not try and service these products yourself,seek only a qualified service center
or factory service center.
or factory service center.
Use only a damp cloth to clean the screen and use only purified water on
the cloth.wring out all excess water prior to wiping the screen. Do not use any
cleaners or chemicals to clean the screen. In most cases a dry cloth will do!
the cloth.wring out all excess water prior to wiping the screen. Do not use any
cleaners or chemicals to clean the screen. In most cases a dry cloth will do!
Be careful not to drop or apply
undue pressure to the front
panel of your video
monitor.If the
screen cracks due to misuse
your warrantly will be void!
1
WARNING
The lightning flash with arrowhead symbol within an
The lightning flash with arrowhead symbol within an
equilateral
triangle
is intended to alert the user to the presence
of
“dangerous voltage"within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric
of sufficient magnitude to constitute a risk of electric
shock
to
persons
.
CAUTION
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing ) instructions in the literature
accompanying the product.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing ) instructions in the literature
accompanying the product.
Touble Shooting
Check point
When
a
disc
is
brought
from
acold
environment
to
a
hot
one
,
there
may
be
steam
on
the
face
of
the
disc
,
or
water
will
appear
on
the
pickup
lens
.
It
will
affect
the
play
.
1.Remove the disc from the DVD player.
2.Turn on the power and leave it on for an hour to vaporize the condensation.
3.You can operate the DVD player without any problem.
2.Turn on the power and leave it on for an hour to vaporize the condensation.
3.You can operate the DVD player without any problem.
The remote control doesn`t work
properly
properly
"
DISK
ERROR
"
is
display
on
the
screen
Distored siund
No color
The playback picture is poor
Stopped picture
No picture
No power
Remove
any
obstacles
between
the
remote
control
unit
and
the
remote
control
sensor
.
Operate
the
remote
control
at
a
shorter
distance
.
Set
the
power
button
to
OFF
and
then
back
to
ON
alternatively
,
Turn
off
the
power
,
disconnect
the
power
plug
,
and
then
reconnect
it
.
Ajust
the
video
system
by
pressing
the
TV
system
button
.(
PAL
,
NTSC
)
The
color
system
set
by
this
unit
does
not
match
the
color
system
of
the
monitor
.
Check
the
color
system
of
the
unit
.
Clean the disc
Make sure that the equipment is
connected properly.Check to see that
the connected monitor is turned on
connected properly.Check to see that
the connected monitor is turned on
Check
to
see
that
the
AC
power
cable
is
connected
propefly
.
Check
to
see
that
the
video
cable
is
connected
.
Check
to
see
that
the
monitor
is
turned
on
.
TROUBLE
ACTION
20