Pyle plvwr7800 사용자 설명서
REPLACING THE CAR DOME LAMP
Follow the directions show below for a new lamp changing.
1. Position light switch to “ ”.
2. Push back the lamp cover and open it. (Refer to the following figure)
3. Remove and discard the old lamp.
4. Install a new bulb.
5. Close the cover.
1. Position light switch to “ ”.
2. Push back the lamp cover and open it. (Refer to the following figure)
3. Remove and discard the old lamp.
4. Install a new bulb.
5. Close the cover.
Bulb Specification
Diameter:
Diameter:
ø8mm
Length:
28mm
Voltage Spec.: DC12V, 5W
CAR DOME LAMP WIRING
4
Color Connection
Red
Power Supply
White Interior Light Supply
Black
Ground
Note:
Lamp Cover
Bulb
Light Switch
Line for Car Dome Lamp