Vision Tech vtm7000q 사용자 가이드
10
POWER
Press the power button to activate the monitor or to keep the monitor
under stand by mode (In Red Led).
SOURCE
With power on, press this button to select image sequence
CAM A+B→CAM C+R→CAM A+RàCAM R+Bà CAM A+Cà
CAM C+B àCAM R+A+B→CAM A→CAM B→CAM C→
CAM R→CAM A+B…….
With pull hand break, press this button to select image sequence
AV→CAM A+B→CAM C+R→CAM A+RàCAM R+Bà CAM A+Cà
CAM C+B à CAM R+A+B→CAM A→CAM B →CAM C→CAM R→
AV……..
CAM C+B àCAM R+A+B→CAM A→CAM B→CAM C→
CAM R→CAM A+B…….
With pull hand break, press this button to select image sequence
AV→CAM A+B→CAM C+R→CAM A+RàCAM R+Bà CAM A+Cà
CAM C+B à CAM R+A+B→CAM A→CAM B →CAM C→CAM R→
AV……..
JUMP
Press this button to display defined camera input, user can select
QUAD / CAM A+B / CAM C+R / CAM A+RàCAM R+Bà
CAM A+CàCAM C+Bà CAM R+A+B/ CAM A / CAM B / CAM C /
CAM R via OSD as default value.
CAM A+CàCAM C+Bà CAM R+A+B/ CAM A / CAM B / CAM C /
CAM R via OSD as default value.
MENU
This encoder switch provides the following function:
1. Activate OSD menu: Press the Menu switch to activate the OSD menu.
After the OSD menu is activated, in case users does not proceed for
After the OSD menu is activated, in case users does not proceed for
further set up, the OSD menu will then automatically turn off within
several seconds.
several seconds.
2. Enter Function: Press the encoder switch to act as “Enter” function
under the OSD menu.
5. Front Panel Control