Sony DSLR-A100 사용자 가이드
138
Image protected.
•
You tried to delete protected images.
Release the protection.
Release the protection.
Unable to print.
•
You tried to mark RAW images with a
DPOF set mark.
DPOF set mark.
Initializing
USB connection.
USB connection.
•
A USB connection has been
established. Do not disconnect the USB
cable.
established. Do not disconnect the USB
cable.
USB connection error
•
A USB connection cannot be
established. Disconnect the USB cable
and connect it again.
established. Disconnect the USB cable
and connect it again.
Error. Check printer.
•
There is a problem with the printer, such
as a paper out condition.
as a paper out condition.
Printing canceled.
•
The print job was canceled. Disconnect
the USB cable or turn the camera off.
the USB cable or turn the camera off.
Camera overheating.
Allow it to cool.
Allow it to cool.
•
The camera has become hot because,
for example, you use the camera for a
long time in extremely hot place.
Turn the power off. Cool the camera and
wait until the camera is ready to shoot
again.
for example, you use the camera for a
long time in extremely hot place.
Turn the power off. Cool the camera and
wait until the camera is ready to shoot
again.
System error.
•
Turn the power off, remove the battery
pack, then re-insert it. If the message
appears frequently, consult your Sony
dealer or local authorized Sony service
facility.
pack, then re-insert it. If the message
appears frequently, consult your Sony
dealer or local authorized Sony service
facility.