Sony MVC-CD250 매뉴얼

다운로드
페이지 132
 model name1[MVC-CD400/CD250]
 [3-075-356-12(1)]
filename[C:\MVC-CD400Nouhinn\3075356121\307535612MVCCD400U2\03bas.fm]
masterpage:Right
13
G
e
tti
n
g
 st
ar
te
d
Getting started
Charging the battery pack
,
Open the battery cover.
Slide the cover in the direction of the arrow 
1
. The battery cover opens in the direction 
the arrow 2.
Be sure to turn off your camera 
when charging the battery pack.
“InfoLITHIUM” is a lithium ion battery pack 
which can exchange information such as 
battery consumption with compatible video 
equipment. “InfoLITHIUM” M series battery 
packs have the 
 mark.
Your camera operates only with the 
“InfoLITHIUM” NP-FM50 battery pack (M 
series) (supplied) (page 120).
,
Install the battery pack, then 
close the battery cover.
Insert the battery pack with the v mark 
facing toward the battery compartment as 
illustrated.
Make sure the battery pack is firmly 
inserted all the way, then close the cover so 
that it clicks.
The battery pack is easily inserted by pushing 
the battery eject lever at the front of the battery 
compartment to the outside.
,
Open the DC IN jack cover and 
connect the DC connecting 
cable to the DC IN jack of your 
camera.
Connect the cable with the v mark facing 
up.
Do not short the DC plug of the AC power 
adaptor with a metallic object, as this may 
cause malfunction.
Do not use the DC plug if it is dirty. Use a dry 
cotton swab to remove any dirt on the DC plug. 
Using a dirty plug can result in improper 
charging.
1
2
3
DC connecting 
cable
AC power adaptor (supplied)
DC IN jack cover