VIZIO XVT3D424SV 사용자 설명서

Using the On-Screen Menu

39

Changing the Advanced Network Settings
Advanced users can fine-tune the network settings using the Manual Setup feature.

To change advanced network settings:

1.  From the Network Connection menu, highlight 

Manual Setup and press OK. The Change 

Settings menu is displayed.

2.  Use the 

Arrow and OK buttons to adjust each setting: 

 
DHCP - (Dynamic Host Configuration Protocol) This setting must be turned Off to change 
any of the other settings. 
 
IP Address - The IP address assigned to the TV. 
 
Subnet Mask - The subnet mask. 
 
Default Gateway - Your network’s default gateway address. 
 
Pref. DNS Server - Your preferred domain name server address. 
 
Alt DNS Server - Your alternate domain name server address.

3.  If you need the RJ45 (ethernet) MAC address or the Wireless MAC address to set up your 

network, these are displayed at the bottom of the Change Settings menu.

4.  Press the 

EXIT button on the remote.

Testing Your Network Connection
To test your network connection:

1.  From the Network Connection menu, highlight 

Test Connection and press OK.

2.  The Test Connection screen displays the connection method, network name, signal 

strength, and download speed of your network connection.

3.  Press the 

EXIT button on the remote.

To pair a Bluetooth device with your TV:

1.  Press the 

MENU button on the remote. The on-screen menu is displayed.

2.  Use the 

Arrow buttons on the remote to highlight the Bluetooth icon and press OK. The 

Bluetooth menu is displayed.

3.  Highlight 

Pair Device and press OK.