VIZIO hdx 20l 사용자 가이드
Version - 2/21/2005
19
www.vizioce.com
Figure 3.2.d
Figure 3.2.e
Figure 3.2.b
Figure 3.2.c
Chapter 3 - Getting Started
3.1 - Turning your LCD TV On and Off
1. Connect one end of the power cord to the back of the television and plug the other end of
the power cord into an AC wall socket.
2. Press the POWER button on the front panel or the POWER button on the remote control
to power on the LCD TV. The POWER indicator on the front panel will light green.
3. Select input source for the LCD TV, via either OSD menu or remote control.
4. If connecting to antenna, cable or other RF source on TV inputs, see page 22 to
4. If connecting to antenna, cable or other RF source on TV inputs, see page 22 to
configure the product to receive all available channels.
3.2 - Installation of Wall Mount (Optional)
If you would like to mount your 20L LCD TV to the wall, you can contact V, Inc. directly or your
local dealer to obtain the appropriate wall mounting kit. To convert your LCD TV from a desk-
mounted to a wall-mounted display, follow the instructions below:
local dealer to obtain the appropriate wall mounting kit. To convert your LCD TV from a desk-
mounted to a wall-mounted display, follow the instructions below:
1. Disconnect power from the LCD TV.
2. On a solid surface, lay the LCD TV face down on a towel or
2. On a solid surface, lay the LCD TV face down on a towel or
blanket to protect the screen from damage.
3. Place 2 fingers firmly underneath the small plastic hook on the
stand and use your alternate hand to secure the TV (see Figure
3.2.a and 3.2.b).
3.2.a and 3.2.b).
4. Pull upward and outward away from the LCD TV to expose the stand (see Figure 3.2.b
and 3.2.c).
5. Remove the 4 screws at the top of the metal plate and take off the
base (see Figure 3.2.d).
6. Attach the mounting bracket from the VESA compatible wall
mounting kit (100 mm x 100 mm size) using the 4 holes in the
center of the back panel (see Figure 3.2.e).
center of the back panel (see Figure 3.2.e).
7. Attach the LCD TV to the wall by following the instructions included
in your wall mounting kit.
Figure 3.2.a