VIZIO hdx 20l 사용자 가이드

Version - 2/21/2005 

30 

www.vizioce.com 

 

 

1.  Make sure that the power cable is removed from the socket before cleaning the 

display. 

2.  Do not use volatile solvent (such as toluene, rosin and alcohol) to clean the display.  

Such chemicals may damage the housing, screen glass and remote control, and 
cause the paint to peel. 

 
Cleaning the Housing and the Remote Control 

 

1.  Use a soft cotton cloth for cleaning. 
2.  If the housing or remote control is seriously contaminated, use a soft cloth moistened 

with diluted neutral cleaner to clean the display.  Wring water out of the cloth before 
cleaning to prevent water from penetrating into the housing.  Wipe the display with a 
dry cloth after cleaning. 

 
Cleaning the Screen 

 

1.  Use a soft cotton cloth to gently clean the screen. 
2.  The screen glass is very fragile. Do not scrape it with any sharp object.  Do not press 

or tap the screen to avoid cracking.  When the screen is seriously contaminated, use 
a soft cloth moistened with diluted neutral cleaner to clean the display.  Wring water 
out of the cloth before cleaning to prevent water from penetrating into the housing.  
Wipe the display with a dry cloth after cleaning. 

If the display fails or the performance changes dramatically, check the display in accordance with 
the following instructions.  Remember to check the peripherals to pinpoint the source of the 
failure.  If the display still fails to perform as expected, contact the dealer for assistance. 

 

Problem 

Solution 

There is not any power. 

Make sure the DC power button is ON (green LED). 
Make sure the AC power cord is securely connected to the 
AC socket. 
Plug another electrical device to the power outlet to verify that 
the outlet is working properly. 

Power is ON, but there is not 
any screen image. 

Make sure the video cable supplied with the LCD display is 
tightly secured to the video output port on the back of the 
DVD player or VCR. If the other end of the video cable is not 
attached permanently to the LCD display, tightly secure it to 
the LCD display. 
Adjust brightness and contrast. 
Check Source settings. 

The image on the screen has 
incorrect or abnormal colors. 

If any colors (red, green, or blue) are missing, check the 
video cable (YPbPr) to make sure it is securely connected. 
Loose or broken pins in the cable connector could cause an 
improper connection. 
Connect the LCD display to another DVD Player or VCR.