VTech LS6215-2 사용자 가이드

34

Caller ID service delivers 10 digits (the area code plus the seven-digits number). If 

you need to dial something other 10 digits, see page 21 for instructions on changing 

the number.   
If you dial seven digits for local calls you might want to use the 

Home area code 

feature (page 8).

The handset might be out of range. Move it closer to the telephone base.
Make sure the power cord is securely plugged into the telephone base. Use a 

working electrical outlet not controlled by a wall switch.
Reset your telephone by unplugging the power adapter from the telephone base. 

Disconnect the battery from the cordless handset. Wait for 15 seconds, then plug 

in the power adapter and re-install the battery. Place the handset in the telephone 

base and allow up to one minute for the handset and telephone base to synchronize.
Other electronic products might prevent your handset and telephone base from 

communicating with each other. Install your telephone base as far away from 

these electronic devices as possible: wireless routers, radios, cellular telephones, 

intercoms, room monitors, televisions, personal computers, kitchen appliances and 

other cordless telephones.

If the telephone is not responding normally, put the cordless handset in the 

telephone base. If it does not respond, try the following (in the order listed):
Disconnect the power to the telephone base.
Disconnect the battery on the cordless handset.
Wait a few minutes before connecting power to the telephone base.
Re-install the battery and place the cordless handset in the telephone base  

or charger.
Wait for the cordless handset to synchronize with the telephone base. Allow up to 

one minute for this to take place.

•

•

•
•

•

•

•

•
•
•
•

•