JVC GR-AX270 사용자 설명서

ç© 1     0:00:25          

 6

ç  1     0:00:25           0:01:05

© 4     0:04:11         

 6

PREPARE CAMCORDER

Insert a recorded tape and set the Power switch to
“PLAY”.

PREPARE VCR

Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).

ACCESS R.A. EDIT COUNTER

DISPLAY

Press PLAY/PAUSE, then press R.A. EDIT and the
counter display appears in the viewfinder and the
screen of the connected TV.

REGISTER BEGINNING OF SCENE

Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under IN on the display.

REGISTER END OF SCENE

Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
OUT on the display. The total time of the registered
scene(s) is displayed at the bottom of the screen.

REGISTER ADDITIONAL SCENES

Repeat steps 2 and 3 for each additional scene
(as many as 8).

MAKE CORRECTIONS

Press CANCEL during steps 2 and 3 to erase the
most recently registered point.

● There must be at least one second between an in-point and

its corresponding out-point.

● To ensure correct operation, leave at least 15 seconds open

between scenes.

● Blank portions of tape cannot be registered as in-points or

out-points.

● If it takes more than 5 minutes to search for an in-point, the

VCR’s Record-Pause mode is cancelled and editing doesn’t
take place.

● Pressing R.A.EDIT clears all in- and out-points from

memory.

● Leave a small margin for error around each in-point to

ensure the scene is recorded in its entirety.

Audio and
Video cable
(optional)

Open the cover

To J terminal
(JLIP)

To AUDIO
and VIDEO
out connectors

To Remote
PAUSE

To Pause-In

To AUDIO
and VIDEO IN
connectors

If your TV/VCR
has the SCART
connector, use
the provided
cable adapter.

Editing cable
(optional,3.5ø
mini-plug cable)