JVC GR-AXM33 지침 매뉴얼

 EN

Auto date record mode

Auto date record 
executed

To display the date and time on the
LCD monitor, in the viewfinder, or
on a connected color monitor, as
well as to record them manually or
automatically.

1) Turn the Select Dial to any

position except AUTO LOCK.

2) Choose a display mode by

pressing DATE/TIME repeatedly
while in Record-Standby to cycle
through the modes as shown in the
illustration at left.

n

You should have already
performed the Date/Time Setting
procedure (

Z 

pg. 11). If you

haven’t, do so first.

● The selected display can be

recorded.

● If you don’t want to record the

display, select the Date-off mode
before shooting.

● If you want to delete the display

during shooting, press DATE/TIME.

● To recall the display, engage the

Record-Standby mode and press
DATE/TIME repeatedly until the
desired display appears.

● Your camcorder automatically

records the date for about 5
seconds after recording is initiated
in the following situations:

•

After changing the date.

•

After loading a cassette.

•

After Auto Date Record mode is
selected by pressing DATE/TIME.

In this mode, the date is replaced
after 5 seconds with “AUTO DATE”
but this is not recorded.

● Setting the Select Dial to AUTO

LOCK always engages the Auto
Date Record mode, and disables
all other modes.