JVC gr-d370 사용자 설명서

MasterPage: Left

Allows high-speed search in either direction 
during video playback.
1) During playback, press 

¡ for forward 

search, or 

1 for reverse search.

2) To resume normal playback, press 

6.

●

During playback, press and hold 

¡

 or 

1

. The 

search continues as long as you hold the button. 
Once you release the button, normal playback 
resumes.

●

A slight mosaic effect appears on the display 
during Shuttle Search. This is not a malfunction.

During Shuttle Search, parts 
of the picture may not be 
clearly visible, particularly on 
the left side of the screen.

Helps you find where you should start recording 
in the middle of a tape to avoid time code 
interruption. (

Load a cassette. (

Set the VIDEO/MEMORY Switch to “VIDEO”.

Set the Power Switch to “PLAY” while 

pressing down the Lock Button located on the 
switch.

Press BLANK.

●

The “BLANK SEARCH” indication appears and 
the camcorder automatically starts reverse or 
forward search, then stops at the spot which is 
about 3 seconds of tape before the beginning of 
the detected blank portion.

●

To cancel Blank Search, press 

7 or 

.

●

Before starting Blank Search, if the current 
position is at a blank portion, the camcorder 
searches in the reverse direction. If the current 
position is at a recorded portion, the camcorder 
searches in the forward direction.

●

If the beginning or end of the tape is reached 
during Blank Search, the camcorder stops 
automatically.

●

A blank portion which is shorter than 5 seconds of 
tape may not be detected.

●

The detected blank portion may be located 
between recorded scenes. Before you start 
recording, make sure there is no recorded scene 
after the blank portion. 

GR-D370US.book  Page 22  Monday, August 28, 2006  4:42 PM