JVC gr-d796 사용자 설명서

다운로드
페이지 48
EN
 31
MENUS FOR DETAILED ADJUSTMENT
MasterPage: Start_Right
ADV
ANCED FEA
TURES
OFF: Allows you to shoot dark scenes with no 
picture brightness adjustment.
[AGC]: The overall appearance may be grainy, 
but the image is bright.
AUTO 
: The shutter speed is 
automatically adjusted. Shooting a subject in 
low or poor lighting at slow shutter speed 
provides a brighter image than in the AGC 
mode, but the subject’s movements are not 
smooth or natural. The overall appearance 
may be grainy. While the shutter speed is 
being automatically adjusted, “
” is 
displayed. 
[OFF]: Disengages the function.
ON 
: Helps cut down on noise created by 
wind. The “
” indicator appears. The quality 
of the sound will change. This is normal.
* Available only when the VIDEO/MEMORY 
Switch is set to “VIDEO”.
[640 x 480 F] / 640 x 480 S
The Image Size mode can be selected to best 
match your needs. Two Picture Quality modes 
are available: FINE (
) and STANDARD 
(
) (in order of quality).
NOTE:
The number of storable images depends on the 
selected picture quality as well as the composition 
of the subjects in the images and the type of 
memory card being used. (
* Available only when the VIDEO/MEMORY 
Switch is set to “MEMORY”.
VTR
Available only when the VIDEO/MEMORY 
Switch is set to “VIDEO”.
[SP]*: To record in the SP (Standard Play) 
mode.
LP: Long Play—more economical, providing 
1.5 times the recording time.
* SP indicator does not appear on the screen.
NOTES:
If the recording mode is switched, the playback 
picture will be blurred at the switching point.
During playback of a tape recorded on another 
camcorder, blocks of noise may appear or there 
may be momentary pauses in the sound.
[12BIT]: Enables video recording of stereo 
sound on four separate channels. (Equivalent 
to the 32 kHz mode of previous models)
16BIT: Enables video recording of stereo 
sound on two separate channels. (Equivalent 
to the 48 kHz mode of previous models)
 (TAPE): When Snapshot recording is 
performed with the VIDEO/MEMORY Switch 
set to “VIDEO”, still images are recorded only 
onto the tape.
/
 (TAPE/CARD): When Snapshot 
recording is performed with the VIDEO/
MEMORY
 Switch set to “VIDEO”, still images 
are recorded not only onto the tape but also in 
the memory card (640 x 480 pixels). 
[
 (CARD)]: When Snapshot recording is 
performed with the VIDEO/MEMORY Switch 
Set to “VIDEO”, still images are recorded into 
the Memory Card only. Select this setting to 
perform Dual Rec.. 
GAIN UP
WIND CUT*
IMAGE SIZE*
640
F
640
S
REC MODE
SOUND MODE
REC SELECT
GR-D796US_EN.book  Page 31  Friday, December 15, 2006  11:31 AM