JVC GR-DVL317 사용자 가이드

EN

Rewind Button (2)

Fast-Forward
Button (3)

Play/Pause Button (4/6)

Stop Button (5)

Load a tape (

 pg. 12).

Set the VIDEO/DSC Switch to “VIDEO” (GR-DVL817
only), then set the Power Switch to “

” while

pressing down the Lock Button located on the switch.
To start playback, press 4/6.

•To stop playback, press 5.
•Press 2 to rewind, or 3 to fast-forward the tape

during Stop mode.

.... slide the Power Zoom Lever (VOL.) towards “+” to

turn up the volume, or towards “–” to turn down the
volume.

● If Stop mode continues for 5 minutes when power is

supplied from a battery, the camcorder shuts off automati-
cally. To turn on again, set the Power Switch to “OFF”, then
to “

”.

● The playback picture can be viewed in the LCD monitor,

viewfinder or on a connected TV (

 pg. 22).

● You can also view the playback picture on the LCD monitor

with it flipped over and pushed against the camera body.

● LCD monitor/viewfinder indications:

•

When power is supplied from a battery: the “

”

battery pack remaining power indicator is displayed.
When power is supplied from an AC outlet: “

” does

not appear.

•

During Stop mode, none of the indications are displayed.

● When a cable is connected to the AV connector, the sound

is not heard from the speaker.

Pauses during playback.

1) Press 4/6 during playback.
2) To resume normal playback, press 4/6 again.

● If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automatically

engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

● When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still image.

Allows high-speed search in either direction.

1) Press 3 for forward or 2 for reverse search during playback.
2) To resume normal playback, press 4/6.

● During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you

release it, normal playback resumes.

● A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

 Allows frame-by-frame search.

1) Engage Still Playback.
2) Rotate the MENU/BRIGHT wheel towards “+” for forward Frame-By-Frame Playback, or towards “–” for reverse

Frame-By-Frame Playback during Still Playback.

 To resume normal playback, press 4/6.

● If you are using the GR-DVL817, you can also use the provided remote control for Frame-By-Frame Playback

(

 pg. 59).

Available only with the remote control (provided) (

 pg. 59, 60).