JVC GR-DVM55 사용자 설명서

EN 

4

4

Set depending on your preference.

Set the Power Dial to “

” while pressing down

the lock button located on the dial.

Open the LCD monitor fully.
The power lamp comes on and the camcorder
is turned on.

•The LCD monitor turns on/off automatically

when it is opened/closed at approx. 90 degrees
while the Power Dial is set to any operation
mode (except “OFF”).

•The LCD monitor can be tilted upward up to

180 degrees and downward up to 90 degrees.

Press MENU. The Recording Menu appears.

First move the pointer and highlight bar to
“REC MODE” by rotating the Select Dial. Press
the Select Dial and the parameter “SP” or “LP”
is highlighted. Select “SP” or “LP” by rotating
the Select Dial. Press the Select Dial twice to
exit from the Recording Menu.

•“LP” (Long Play) is more economical,

providing 1.5 times the recording time.

•Audio Dubbing is impossible on a tape

recorded in the LP mode.

●

If the recording mode is switched during
recording, the playback picture will be blurred at
the switching point.

●

It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.

●

During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.