JVC GR-DVM50 사용자 가이드

 EN

Before the following steps, perform step 1 (

Z

 pg. 16).

Make sure the viewfinder is pushed back in. Set the
Operation Switch to “

” or “

”. Then, set the

Power Switch to “

” while pressing down the

Lock Button.
Open the LCD monitor fully.

•The lens cover opens, the power lamp lights and the

camcorder enters the Record-Standby mode.

•The scene you are aimed at appears in the LCD

monitor, with the word “PAUSE” superimposed
upon it.

Tilt the LCD monitor upward/downward for best
viewability (

Z

 pg. 19) and press START/STOP.

•“

” appears in the LCD monitor while recording

is in progress.

Press START/STOP again to stop recording.

•The camcorder re-enters the Record-Standby mode.

●

When you use the LCD monitor outdoors in direct
sunlight, the LCD monitor may be difficult to see. If this
happens, we recommend that you use the viewfinder
(

Z

 pg. 16).

●

To turn the tally lamp off during recording, refer to
pgs. 28 and 30.

●

For other notes, refer to pg. 17.

°

°