JVC GR-DVX707 지침 매뉴얼
EN
79
Master Page: Right
GR-DVX707EG_37-79.fm
Page 79
This camcorder can be used as a WebCam via USB
connection.
connection.
1
Make sure all necessary software (provided) are
installed in your PC and all units are turned off.
installed in your PC and all units are turned off.
2
Connect the camcorder to your PC using the USB
cable.
cable.
3
Set the VIDEO/MEMORY Switch to “MEMORY”.
4
Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
pressing down the Lock Button located on the
switch.
5
Turn on the PC.
● “Web CAMERA” appears on the screen.
● If the PC is not
powered on, the
camcorder does not
enter the Web
Camera mode.
camcorder does not
enter the Web
Camera mode.
6
When finished, turn
off the PC first, then
the camcorder.
Disconnect the USB cable from the camcorder
and PC.
off the PC first, then
the camcorder.
Disconnect the USB cable from the camcorder
and PC.
NOTES:
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
(
(
墌 pg. 11)
● Use the provided software PIXELA ImageMixer to
capture video in real time.
● You can also use the camcorder for web
conference by using Microsoft Windows
®
NetMeeting
®
and signing up for MSN Hotmail.
● In the Web Camera mode, the following buttons
cannot be operated: E-MAIL, SNAPSHOT, the
Recording Start/Stop Button.
Recording Start/Stop Button.
Using The Camcorder As A
WebCam (GR-DVX707 only)
WebCam (GR-DVX707 only)
VIDEO/MEMORY
Switch
Switch
Open the
connector cover.
To USB
To USB connector
USB cable
(provided)
(provided)
USB-equipped PC
Refer to the instruction manuals of the PC and
provided Software.
provided Software.
b CAMERA
e
W
b CAMERA
e
W
P C
GR-DVX707EG_37-79.fm Page 79 Tuesday, February 5, 2002 3:00 PM