JVC GR-SX897 지침 매뉴얼

Allows you to set the tape length depending on the
tape used: T20=20 minutes, T30=30 minutes,
T35=35 minutes, T40=40 minutes.
• Tape remaining time 

1

 is correct only if the

correct tape length has been selected.

FULL: Makes all of the indications appear on the
LCD monitor*/viewfinder during playback or
recording.

SIMPLE: Makes the following indications
disappear from the LCD monitor*/viewfinder during
recording or playback: 

, tape remaining time,

, tape length (

 pg. 9, 17).

Makes the date/time appear in the camcorder or on
a connected monitor (set DATE/TIME in SYSTEM
MENU first 

 pg. 7).

• The selected display will be recorded. If you do

not want to record the display, select OFF before
shooting.

• In the AUTO DATE mode, the camcorder records

the date for about 5 seconds when recording is
initiated after the date is changed, a cassette is
loaded, or AUTO DATE is selected. The date is
replaced after 5 seconds with “AUTO DATE” but
this is not recorded.

ON: On-screen indications are displayed.

OFF: On-screen indications are turned off except
Date/Time, Instant Title and Warning Indication.

You can shoot a series of pictures, each slightly
different, of the same object for a brief selected
period of time (Animation). REC MODE should be
set to “SP”.

Select the desired recording time and press the
Recording Start/Stop Button 

0

 after focusing on

the subject.
• The remote control can also be used for this

setting**. (

 pg. 26, “Animation And Time-

Lapse”)

• Fade- or wipe-in/out cannot be performed.
• This function is cancelled when the power is shut

off or when the cassette is ejected.

• To use this function, it is recommended that

SCROLL in TITLE SETUP (

 pg. 18, 19) be set

to “OFF”.

*   Applicable models only.

** GR-SXM967, GR-SXM367 only

You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time (Time-Lapse). REC MODE should
be set to “SP”.
(Please note that it is necessary to set the REC
TIME (Animation) in SYSTEM MENU before
performing the INT. TIME (Time-Lapse) function.)

Select the desired interval time and press the
Recording Start/Stop Button 

0

.

• The remote control can also be used for this

setting*. (

 pg. 26, “Animation And Time-Lapse”)

• Fade- or wipe-in/out cannot be performed.
• This function is cancelled when the power is shut

off or when the cassette is ejected.

• To use this function, it is recommended that

SCROLL in TITLE SETUP (

 pg. 18, 19) be set

to “OFF”.

* GR-SXM967, GR-SXM367 only

When set to “ON”, you can shoot a subject as large
as possible at a distance of approx. 60 cm (23-5/8").
Depending on the zoom position, the lens may go
out of focus.

GR-SXM967-EN

3/11/03, 10:33 AM

21