JVC GR-SXM26 사용자 가이드
EN
13
1
3
3
2
2
180
°
180
°
2
3
1
4
PAUSE
Power Zoom Lever
Recording Start/
Stop Button
Stop Button
Set to “CAMERA”
(“AUTO” or “PRO.”).
(“AUTO” or “PRO.”).
Grip Adjustment
1
Separate the Velcro strip.
2
Pass your right hand through the loop and grasp the
grip.
grip.
3
Adjust so that your thumb and fingers can easily
operate the Recording Start/Stop Button and Power
Zoom Lever. Refasten the Velcro strip.
operate the Recording Start/Stop Button and Power
Zoom Lever. Refasten the Velcro strip.
Viewfinder Adjustment
1
Set the Power Switch to “CAMERA” (“AUTO” or
“PRO.”).
“PRO.”).
2
Adjust the viewfinder manually for best viewability.
3
Turn the Diopter Adjustment Control until the
indications in the viewfinder are clearly focused.
indications in the viewfinder are clearly focused.
Shoulder Strap Attachment
1
Following the illustration, thread the strap through the
eyelet
eyelet
1
, then fold it back and thread it through the
buckle
2
. Repeat the procedure to attach the other
end of the strap to the other eyelet
3
, making sure
the strap is not twisted.
2
Adjust as shown in the illustration
4
.
CAUTION:
When using a tripod, be sure to open and extend
its legs fully to Stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
its legs fully to Stabilize the camcorder. To
prevent damage to the unit caused by falling
over, do not use a small-sized tripod.
Tripod Mounting
1
Align the screw and camera direction stud on the
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.
tripod with the camera’s mounting socket and stud
hole. Then tighten the screw.