JVC GY-DV5100 사용자 가이드

27

■ Alarm Message Display

● The following alarm messages are displayed while the Status(0, 1, 3)

screen is shown in the Camera mode, or a status screen is shown in
the VTR mode.
If an alarm is generated while the Status 2 screen is shown, the Status
0 screen returns to display the alarm.

● When an abnormality occurs in the VTR, a warning message with an

error code is displayed.

Alarm display area

Alarm display area

 

 

 
 

                       FAS 
                       –3dB
                        FAW
                        I
                         SD

B 

12.2V 

01/02/03 AM01:23:45

Alarm Indication

Contents

PAL INHIBIT

Displayed when attempt is made to play back a tape recorded with PAL signal.

REC INHIBIT

Displayed when an unrecordable videocassette (the switch on the back of the
cassette is set to “SAVE”) is loaded.

COPY INHIBIT

Displayed when attempt is made to record a copy-guarded signal.

LOW VOLTAGE*

Displayed when remaining battery power becomes low.

TAPE NEAR END

Flashes when the remaining tape is 3 minutes or less in the shooting mode. It is
not shown in the playback mode.

TAPE END

Displayed when the tape has reached its end.

INVALID TAPE!

Displayed when a data tape for PC use or DVC PRO cassette is used. The tape
is ejected.

LP TAPE INVALID!

Displayed when attempt is made to playback a tape recorded in the LP mode.

NO TAPE

Displayed when no videocassette is inserted and the VTR trigger button is
pressed.

NO DV SIGNAL

Displayed when there is no input to the DV connector and recording is attempted.

COPY GUARD!

Displayed when attempt is made to play back a copy-guarded tape.

CLEANING TAPE!

Displayed when a head cleaning tape is inserted.

HEAD CLEANING REQUIRED!

Displayed when head is clogged. Head cleaning is necessary.

CLOSE CASSETTE COVER!

Displayed when operation is attempted while the cassette cover is open.

OPEN CASSETTE COVER!

Displayed when the cassette cover is closed during the eject operation.

VTR WARNING (Error code)*

Displayed in case abnormalities occur in the VCR, or when condensation occurs

(Example)

in the unit. For details, 

☞ see page 97.

* When displaying enlarged characters, only LOW VOLTAGE and VTR WARNING are displayed.

e04_dv5100u(21_30)e.p65

12/10/04, 2:17 PM

27