Lexmark X204n 사용자 가이드
39 Complex page, some data may not have printed
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to clear the message and continue printing.
•
Cancel the current print job.
54 Standard network software error
Try one or more of the following:
•
Press the arrow buttons until Continue appears, and then press
to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
54 Network <x> software error
Try one or more of the following:
•
Press the arrow buttons until
Continue
appears, and then press
to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
56 Standard USB port disabled
Try one or more of the following:
•
The printer discards any data received through the USB port. Press
to clear the message and continue printing.
•
Make sure the USB Buffer menu item is not set to Disabled.
84 PC Kit life warning
The photoconductor kit is near exhaustion.
Try one or more of the following:
•
Replace the photoconductor kit.
•
Press
to clear the message and continue printing.
84 Replace PC Kit
The photoconductor kit is exhausted. Install a new photoconductor kit.
88.yy Cartridge is low
Replace the toner cartridge, and then press
to clear the message and continue printing.
200–250 paper jam
1
Clear the paper path. For more information, see “Clearing jams” on page 132.
2
After clearing the paper path, press
to resume printing.
Troubleshooting
129