GE zisb480dr 사용자 설명서

When a raised panel design is to be used, a 
custom wide middle rail is required to accept
the dispenser trim.
• The middle rail must be wide enough to allow

for the dispenser trim to overlap the opening.

• The middle rail must be 1.100" total thickness

to accept the dispenser trim.

• The dispenser trim fits over the 

custom panel and snaps into the
freezer door. 

• The clips will not engage the door if

the panel is more than 0.250" thick.

• If the panel is less than 0.250" thick, 

a noticeable gap may be created
around the dispenser trim.

• The dispenser trim fits over the 

custom panel and snaps into the
freezer door. 

• The clips will not engage the door if

the panel is more than 1.100" thick.

• If the panel is less than 1.100" thick, 

a noticeable gap may be created
around the dispenser trim.

1/4" Backer Panel
.10" Spacer
3/4" Overlay Panel

Wide

Middle

Rail is

Required

Dispenser

Trim

16-3/4"

10-5/8"

1/4"

Framed

Panel

1/4" Backer Panel

.10" Spacer

Panel

1/4" Dispenser Trim

3/4" Overlay Dispenser Trim

3/4" Overlay

Panel

FREEZER DOOR

FREEZER DOOR

0.250"

Thick

1.100"

Total Thickness

Ice / Water Dispenser

Ice / Water Dispenser